Rust is the number 1 enemy of our power tools but it takes a lot of our time to make sure that it is free from it. We should remember that keeping any of our power tools in our garages and basements makes them a vulnerable to harsh elements because of the humidity There are simple stuffs that you can do to lessen your time cleaning your power tools .
To find superb advice in addition to other important information involving woodworking tips visit my related blogs here woodworking tips
When you purchase a new power tool, it is shipped with a thick coating of Cosmoline to protect the cast iron from rusting. But as soon as it riches your place or shop these are being removed and the tools are left unprotected . There are times that the woodworkers would just wash the cosmoline entirely without thinking of its future protection .
Protecting our power tools would mean that we need to coat them again to keep away moisture. The easiest and most effective method is to apply one of the commercially available rust preventative sprays. Boeshield T-9 and the Empire Top Saver are the two most popular brands.These sprays should be applied all over the tool making sure that there is no excesses left and this should be done periodically .
The unfortunate reality of tool ownership is that despite every good intention, tools left unprotected will eventually develop rust. Furthermore, if left alone, the rust will only continue get worse.
This jointer was left unprotected. There is already an accumulation of sawdust all over it that can cause rust. After a couple of years this cast iron will need care.
The old methods of rust removal generally focused on using abrasives such as steel wool. While this works, it is difficult to get the abrasives into the pits created by rust. Luckily there are products that can do the job for you.
A product called Rust Free by Boeshield is a rust remover that quickly removes rust. This is great on large tools that can't be soaked on rust solutions . To use Rust Free you need to spray it on the rusted areas, wait a minute, and then just wipe dry. If there's still rust remaining you can use abrasive tools to remove it.
Now that the jointer is free from rust you may apply rust protection on it. You may find small rust pits that is caused by the rusts that was formed previously. There is no way that a rust removal can repair a rust pit.
These rust removal is made up of acids that instantly removes rust and can slowly affect metals so make sure that you are using protective covering when you are using these products.
By following these methods of rust prevention and rust removal your cast iron power tools will last a lifetime.
